ASTM Standard Gr2 Titanium Round Bar

ASTM standards for Gr2 titanium round bars require special technical requirements.

The chemical composition of titanium and titanium alloy bars shall comply with the provisions of GB / T 3620.1, and when the repeated inspection is required, the allowable deviation of the chemical composition shall comply with the provisions of GB / T 3620.2.
The diameter or side length of the hot-processed bar and its allowable deviation should meet the requirements of Table 1.
After hot working, the diameter of the cold-drawn bar and the cold-rolled bar (ground) and cold-rolled bar should be in accordance with the requirement.
The out-of-roundness of the bar after turning (grinding) after hot processing should not be greater than half of its dimensional tolerance.
The length of the indeterminate length of the processed bar is 300-6000mm, and the length of the annealed bar is 300-2000mm. The length of the fixed-length or multiple lengths should be within the length of the indefinite length. The allowable deviation of the fixed-length is + 20mm; The length of the double ruler should also be included in the cut amount of the bar, each cut amount is 5mm. The fixed ruler or double ruler length should be indicated in the contract.

<=1000USD, 50% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment.or negotiable

A: We have many professionals, technical personnel, more competitive prices and best after-dales service than other stainless steel companies.

Cool tags: astm standard gr2 titanium round bar, China astm standard gr2 titanium round bar manufacturers, suppliers, factory, လက်ကားတိုက်တေနီယမ်လှံတံ, အီလက်ထရောနစ်ဒီဇိုင်းအတွက်တိုက်တေနီယမ်လှံတံ, စျေးနှုန်းသင့် titanium လှံတံ, တိုက်တေနီယမ်လှံတံ Trends, စင်ကြယ်သော titanium လှံတံ, Standard Titanium လှံတံ